> Source: [sk92712](https://support.checkpoint.com/results/sk/sk92712)

# sk92712 - LACP on Cisco switches does not come up properly when configured on Gaia OS

| Property | Value |
|----------|-------|
| Solution ID | sk92712 |
| Date Created | 2013-04-17 |
| Last Modified | 2025-01-29 |
| Technical Level | Advanced |
| Products | Security Gateway |
| Versions | R81.20, R81.10 (EOS), R81 (EOS) |
| OS | Gaia |

## Symptoms

- * LACP on Cisco switches does not come up properly when configured on Gaia OS.   

* The '`cphaconf show_bond -a`' command shows that only one interface is 'Active', and the other interface is 'Not Available'.  
  Note: Command "`cphaprob show_bond`" in R80.20 replaces "`cphaconf show_bond -a`" used in previous releases.  

* Only one Slave interface is Active in a Load-Sharing Bond interface.  

* The Aggregator IDs of the slave interfaces of a bond group are different.
* The Bond physical slave interfaces have an identical speed set for them

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content