> Source: [sk27242](https://support.checkpoint.com/results/sk/sk27242)

# sk27242 - How to change the SecurePlatform WebUI default access port

| Property | Value |
|----------|-------|
| Solution ID | sk27242 |
| Date Created | 2004-09-27 |
| Last Modified | 2019-10-27 |
| Technical Level | General |
| Products | Security Gateway |
| Versions | R82.10, R82, R81.20 |

## Solution

The SecurePlatform WebUI default access port is HTTPS 443.  
To change it, log in to the SecurePlatform CLI in Standard mode, and run this command:

`webui enable `*<port_number>*

The machine then presents this output:

`Shutting down cp_http_server_wd [OK]`  
`Shutting down cpwmd_wd [OK]`  
`Running cp_http_server_wd [OK]`  
`Running cpwmd_wd [OK]`

<br />

To disable access to the WebUI, run the command:

`webui disable`

**Related solutions**:

* [sk91380 - How to troubleshoot Gaia Portal (WebUI)](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380)
* [sk125293 - Configuring WebUI access port to 443 on Gaia Embedded fails](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk125293)

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content