> Source: [sk185142](https://support.checkpoint.com/results/sk/sk185142)

# sk185142 - Endpoint Security VPN IKEv2 Remote Access Connections Fail During Certificate Validation or EAP Authentication

| Property | Value |
|----------|-------|
| Solution ID | sk185142 |
| Date Created | 2026-07-09 |
| Last Modified | 2026-08-02 |
| Technical Level | Advanced |
| Products | Endpoint Security |
| Versions | E89.X |

## Symptoms

- * Remote Access Virtual Private Network (VPN) connections that use Internet Key Exchange version 2 (IKEv2) fail to connect, while IKEv1 connections work in the same environment.
* The issue occurs during migration of Remote Access VPN clients to IKEv2 with Endpoint Security VPN or Standalone Endpoint Security Client.
* Endpoint Security VPN client logs show certificate validation failures during IKEv2 authentication.
* The client fails to validate the Security Gateway certificate chain even when the relevant Root Certificate Authority (CA) certificate exists in the Windows Trusted Certificate Store.
* The IKEv2 and Extensible Authentication Protocol (EAP) exchange hangs and times out before the client sends the EAP response.
* The issue occurs when the Security Gateway sends multiple certificate payloads in the first `IKE_AUTH` response. These payloads include the Security Gateway leaf certificate and the intermediate subordinate Certificate Authority (Sub CA) certificate, together with an `EAP_REQUEST`.
* The client `trac.log` shows:

      cert 0 is not valid
      Validation failed
      Signature length mismatch
      Certificate is badly signed
      Verify certificate chain signatures failed

## Cause

The issue has two related client-side conditions in the Endpoint Security VPN IKEv2 flow.

1.

   #### Certificate Chain Validation

   The Windows VPN client must validate the full certificate chain that the Security Gateway sends. The Security Gateway uses this Public Key Infrastructure (PKI) chain:   
   **Root CA \> Subordinate CA \> Security Gateway certificate**

   The Root CA exists in the Windows OS certificate store. However, the IKEv2 flow uses the **cpcrypto**internal trusted certificate store. This internal store does not automatically rely on the Windows certificate store.

   The client certificate-chain logic adds Root CA certificates to the **cpcrypto** trusted certificate store only when the Root CA directly signs the entity certificate. In this scenario, the Root CA signs the Sub CA, not the Security Gateway certificate directly. As a result, the client does not add the Root CA to the **cpcrypto**trusted certificate store, cannot validate the Sub CA certificate, and reports that the certificate is badly signed.
2.

   #### IKEv2 and EAP Processing

   After the certificate validation issue is resolved, a second condition affects the IKEv2 and EAP flow.

   The Security Gateway sends multiple Certificate (CERT) payloads together with an `EAP_REQUEST` in the first` IKE_AUTH` response. Each certificate starts a separate asynchronous validation, and the certificates use the same event object.

   The certificate collection counter is not initialized for EAP mode. The certificates use the same event object. As a result, the IKEv2 exchange remains blocked until timeout, and the client does not send the EAP response.

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
