> Source: [sk183345](https://support.checkpoint.com/results/sk/sk183345)

# sk183345 - Generic Data Center objects do not synchronize across Security Group Members in a Quantum Maestro environment

| Property | Value |
|----------|-------|
| Solution ID | sk183345 |
| Date Created | 2025-05-05 |
| Last Modified | 2025-05-06 |
| Technical Level | General |
| Products | Security Management Server, Scalable Platforms, Multi-Domain Security Management Server |
| Versions | R81.20, R81.20, R81.10 (EOS), R81.10 (EOS), R81.10 (EOS), R81.20 |

## Symptoms

- * In a Quantum Maestro environment, Generic Data Center objects do not synchronize across all Security Group Members.

* The `vsecUpdate.sh` file is present on the Single Management Object (SMO), but not on the non-SMO Security Group Members. The example output from the command below confirms this discrepancy:

  `
  [Expert@FW-ch01-01:0]# g_all ls -hal /opt/CPsuite-R81.20/fw1/tmp/*_vsecUpdate.sh`  
  `
  1_01:`  
  `
  rw------ 1 admin root 1.5K Mar 21 15:51 /opt/CPsuite-R81.20/fw1/tmp/FW_vsecUpdate.sh`  
  `
  1_02:`  
  `
  ls: cannot access /opt/CPsuite-R81.20/fw1/tmp/FW_vsecUpdate.sh: No such file or directory`  
  `
  1_03:`  
  `
  ls: cannot access /opt/CPsuite-R81.20/fw1/tmp/FW_vsecUpdate.sh: No such file or directory`

## Cause

The `vsecUpdate.sh` script, which is generated by the Security Management Server, updates the SMO, but not the non-SMO Security Group Members, as confirmed by the "`g_all dynamic_objects -cfo_show`" command.

Notes:

* The `vsecUpdate.sh` script is a shell script used by CloudGuard Controller (formerly vSEC) to update and synchronize information between the Security Management Server and Security Gateways regarding Data Center objects.
* The "`g_all dynamic_objects`" command is used on Scalable Platforms to manage dynamic objects across all Security Group Members at once.

## Solution

This problem was fixed. The fix is included starting from:

<!-- -->

* [Jumbo Hotfix Accumulator for R81.20](https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.20/Default.htm) starting from Take 79
* [Jumbo Hotfix Accumulator for R81.10](https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/Default.htm) starting from Take 158

**Important Note** : This fix must be installed on the Security Management Server.  

Check Point recommends to always upgrade to the [Recommended version](https://support.checkpoint.com/results/sk/sk95746) ([Security Gateway](https://support.checkpoint.com/product/73) / [VSX](https://support.checkpoint.com/product/359) / [Security Management Server](https://support.checkpoint.com/product/184) / [Multi-Domain Security Management Server](https://support.checkpoint.com/product/166) / [SmartConsole](https://support.checkpoint.com/product/191)).

If you choose not to upgrade, [contact Check Point Support](https://www.checkpoint.com/support-services/contact-support/) to get a Hotfix for your version.

A Support Engineer will make sure the Hotfix is compatible with your environment before providing it.  
For faster resolution and verification, collect these files:

1. [CPinfo](https://support.checkpoint.com/results/sk/sk92739) file from the Management Server involved in the case.
2. [CPinfo](https://support.checkpoint.com/results/sk/sk92739) file from the Security Gateway / each Cluster Member involved in the case.

**Hotfix installation instructions:**   
Refer to [sk168597 - How to install a Hotfix](https://support.checkpoint.com/results/sk/sk168597).

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content