> Source: [sk183155](https://support.checkpoint.com/results/sk/sk183155)

# sk183155 - HW Diagnostics "Network Test" fails for a fiber port with inserted copper transceiver and RJ-45 loopback adapter

| Property | Value |
|----------|-------|
| Solution ID | sk183155 |
| Date Created | 2025-03-03 |
| Last Modified | 2025-03-04 |
| Technical Level | Advanced |
| Products | Hardware |
| Versions | Not Version-Specific |
| OS | Gaia |

## Symptoms

- * HW Diagnostics "Network Test" fails in this scenario:

  1. An appliance was rebooted.
  2. During boot, pressed a key to get into the "Boot Menu".
  3. In the "Boot Menu", selected the option "HW Diagnostics".
  4. In the "HW Diagnostics" menu, selected the option "Diagnostics" and selected the option "Network Test".
  5. Insert a loopback adapter into the port.
  6. Wait for a port LED to start blinking.
  7. Insert a loopback adapter into the next port.

  After connecting an RJ-45 loopback to a copper transceiver and inserting it into a fiber port, the port LEDs did not blink.

  This message appeared on the screen:


  `Timeout waiting for the user to connect loop-back tester to <Name of Interface>`
* `Example:`

  `
  `

  ```
  
  Jan 21 2025 19:27:50 Self tests are supported on interface Mgmt
  Jan 21 2025 19:27:50 Self tests are supported on interface Sync
  Jan 21 2025 19:27:50 Self tests are supported on interface eth1
  Jan 21 2025 19:27:50 Self tests are supported on interface eth2
  ... ...
  Jan 21 2025 19:27:50 Initializing interfaces - setting state, speed, duplex and auto-negotiation
  Jan 21 2025 19:28:46 Probing interfaces
  Jan 21 2025 19:28:46 Currently testing Mgmt
  ... ...
  Jan 21 2025 19:28:58 Self-test info for interface Mgmt
  ... ...
  Jan 21 2025 19:29:02 Waiting for the user to connect loop-back tester to Mgmt
  Jan 21 2025 19:29:11 Test: interface Mgmt was checked successfully
  Jan 21 2025 19:29:11 Currently testing Sync
  ... ...
  Jan 21 2025 19:29:31 Self-test info for interface Sync
  ... ...
  Jan 21 2025 19:29:35 Waiting for the user to connect loop-back tester to Sync
  Jan 21 2025 19:29:44 Test: interface Sync was checked successfully
  Jan 21 2025 19:29:44 Currently testing eth1
  Jan 21 2025 19:29:44     MAC address: XX:XX:XX:XX:XX:XX
  Jan 21 2025 19:29:44    driver: i40e
  Jan 21 2025 19:29:44 Self-test info for interface eth1
  Jan 21 2025 19:29:44     Register test  (offline):     Success
  Jan 21 2025 19:29:44     Eeprom test    (offline):     Success
  Jan 21 2025 19:29:44     Interrupt test (offline):     Success
  Jan 21 2025 19:29:44     Link test   (on/offline):     Skipped
  Jan 21 2025 19:29:48 Waiting for the user to connect loop-back tester to eth1
  Jan 21 2025 19:30:48 Timeout waiting for the user to connect loop-back tester to eth1
  ```

## Cause

Fiber ports support only fiber transceivers.

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
