> Source: [sk120131](https://support.checkpoint.com/results/sk/sk120131)

# sk120131 - Memory utilization in R80.10 Security Gateway / StandAlone

| Property | Value |
|----------|-------|
| Solution ID | sk120131 |
| Date Created | 2017-08-21 |
| Last Modified | 2017-12-04 |
| Technical Level | General |
| Products | Security Gateway, Security Management Server |
| Versions | R82.10, R82, R81.20, R82.20 |
| OS | Gaia |

## Solution

### (1) R80.10 Security Gateway

R80.10 *Security Gateway* introduces optimizations of **20%-30%** in overall memory utilization for [NGTP](https://www.checkpoint.com/products/next-generation-threat-prevention/) and [HTTPS Inspection](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk65123).  
Show / Hide example numbers  
The following are *example* numbers for some appliances in Security Gateway configuration.  
The only purpose of these numbers is to demonstrate the *difference* in memory utilization between R80.10 and R77.30 versions.  
The real memory utilization measured on your appliance will vary depending on your specific configuration  
(the enabled software blades, the configured number of CoreXL FW instances, traffic amount and blend, etc.)
>
> |-----------------|------------------------|--------------------------------|-------------------------|
> | Appliance model | Version and Delta^(1)^ | Used Kernel Memory^(2)^ \[MB\] | Used Memory^(3)^ \[MB\] |
> | **5200**        | R77.30                 | 918                            | 2266                    |
> | **5200**        | R80.10                 | 881                            | 1822                    |
> | **5200**        | **Delta \[MB\]**       | -37                            | -444                    |
> | **5200**        | **Delta \[%\]**        | -4.03%                         | -19.59%                 |
> | **5600**        | R77.30                 | 1187                           | 2940                    |
> | **5600**        | R80.10                 | 1050                           | 2082                    |
> | **5600**        | **Delta \[MB\]**       | -137                           | -858                    |
> | **5600**        | **Delta \[%\]**        | -11.54%                        | -29.18%                 |
> | **15400**       | R77.30                 | 2522                           | 5489                    |
> | **15400**       | R80.10                 | 2059                           | 4147                    |
> | **15400**       | **Delta \[MB\]**       | -463                           | -1342                   |
> | **15400**       | **Delta \[%\]**        | -18.36%                        | -24.45%                 |
>
> Notes:
>
> 1. "Delta" denotes a difference between the memory utilization in R80.10 and in R77.30 (i.e., Delta = "R80.10 utilization" - "R77.30 utilization").
> 2. "Used Kernel Memory" denotes a FireWall kernel memory consumption,  
>    which can be viewed in the output of the "`fw ctl pstat`" command - refer to the "(3) General Notes" section below.
> 3. "Used Memory" denotes an overall memory consumption,  
>    which can be viewed in the output of the "`top`" command - refer to the "(3) General Notes" section below.

### (2) R80.10 StandAlone

R80.10 *StandAlone* introduces a growth of **10%-30%** in overall memory utilization for [NGTP](https://www.checkpoint.com/products/next-generation-threat-prevention/) and [HTTPS Inspection](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk65123).

Notes:

* StandAlone refers to a deployment where Security Gateway and Security Management Server are running on the same appliance.

* Growth in overall memory utilization is attributed to the new Security Management architecture introduced in R80 version.

* R80.10 *Security Management Server* introduces log indexing engine for enhanced log searching capabilities.  
  Log indexing *increases* an overall memory utilization on top of the 10%-30% growth described above.  
  Running *without* the new log indexing *is* supported in R80.10 StandAlone, which would provide the same functionality as in Smart View Tracker in R77.x and below releases.  
  Refer to the [R80.10 Logging and Monitoring Administration Guide](https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/CP_R80.10_LoggingAndMonitoring_AdminGuide/html_frameset.htm) - chapter "Getting Started" - section "Deploying Logging" - subsection "Disabling Log Indexing".

Show / Hide example numbers  
The following are *example* numbers for some appliances in StandAlone configuration.  
The only purpose of these numbers is to demonstrate the *difference* in memory utilization between R80.10 and R77.30 versions.  
The real memory utilization measured on your appliance will vary depending on your specific configuration  
(the enabled software blades, the configured number of CoreXL FW instances, traffic amount and blend, etc.)
>
> |-----------------|------------------------|--------------------------------|-------------------------|
> | Appliance model | Version and Delta^(1)^ | Used Kernel Memory^(2)^ \[MB\] | Used Memory^(3)^ \[MB\] |
> | **5200**        | R77.30                 | 917                            | 3074                    |
> | **5200**        | R80.10                 | 879                            | 4013                    |
> | **5200**        | **Delta \[MB\]**       | -38                            | 939                     |
> | **5200**        | **Delta \[%\]**        | -4.14%                         | 30.55%                  |
> | **5600**        | R77.30                 | 1197                           | 3838                    |
> | **5600**        | R80.10                 | 1056                           | 4743                    |
> | **5600**        | **Delta \[MB\]**       | -141                           | 905                     |
> | **5600**        | **Delta \[%\]**        | -11.78%                        | 23.58%                  |
> | **15400**       | R77.30                 | 2460                           | 5631                    |
> | **15400**       | R80.10                 | 2003                           | 6122                    |
> | **15400**       | **Delta \[MB\]**       | -457                           | 491                     |
> | **15400**       | **Delta \[%\]**        | -18.58%                        | 8.72%                   |
>
> 1. "Delta" denotes a difference between the memory utilization in R80.10 and in R77.30 (i.e., Delta = "R80.10 utilization" - "R77.30 utilization").
> 2. "Used Kernel Memory" denotes a FireWall kernel memory consumption,  
>    which can be viewed in the output of the "`fw ctl pstat`" command - refer to the "(3) General Notes" section below.
> 3. "Used Memory" denotes an overall memory consumption,  
>    which can be viewed in the output of the "`top`" command - refer to the "(3) General Notes" section below.

### (3) General Notes {#General Notes}

* R80.10 Security Gateway optimizations numbers are compared with R77.30 Security Gateway, which already introduced memory optimizations as described in  
  [sk109772 - R77.30 NGTP, NGTX and HTTPS Inspection performance and memory consumption optimization](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk109772).

* Overall memory consumption can be viewed in the output of the "[**top**](https://linux.die.net/man/1/top)" command (refer to the "`Mem:`" line).

  *Example excerpt from the command output*:
  >
  > ```
  > Tasks: 118 total,   2 running, 116 sleeping,   0 stopped,   0 zombie
  > Cpu(s):  0.2%us,  0.2%sy,  0.0%ni, 98.8%id,  0.1%wa,  0.4%hi,  0.3%si,  0.0%st
  > Mem:   8240020k total,  8048480k used,   191540k free,   268024k buffers
  > Swap:  8385920k total,       60k used,  8385860k free,  1538520k cached
  > 
  >   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  >     1 admin     15   0  2044  724  624 S    0  0.0   0:01.56 init
  > ```

* FireWall kernel memory consumption can be viewed in the output of the "**fw ctl pstat** " command (refer to the "`Memory used:`" line).

  *Example excerpt from the command output*:
  >
  > ```
  > System Capacity Summary:
  >   Memory used: 9% (149 MB out of 1508 MB) - below watermark
  >   Concurrent Connections: Not Available
  >   Aggressive Aging is enabled, not active
  > ```

#### Revision History {#Revision History}

Show / Hide revision history  

|-------------|----------------------------------|
| Date        | Description                      |
| 02 Oct 2017 | * First release of this article. |

{#Filter_Revision_HistoryTable}

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
