> Source: [sk116500](https://support.checkpoint.com/results/sk/sk116500)

# sk116500 - OSPF routes from the peer are added to OSPF database, but not to the kernel routing table when the peer is configured to use OSPF Point-to-Point network

| Property | Value |
|----------|-------|
| Solution ID | sk116500 |
| Date Created | 2017-03-23 |
| Last Modified | 2022-09-01 |
| Technical Level | Advanced |
| OS | Gaia |

## Symptoms

- * Output of the Gaia Clish "`show ospf neighbors`" command on Check Point Security Gateway shows that OSPF neighborship with the OSPF peer is established with "FULL" state.

* Output of the Gaia Clish "`show ospf database`" command on Check Point Security Gateway shows that OSPF routes from the peer are added to OSPF database.

* Output of the Gaia Clish "`show route`" command on Check Point Security Gateway shows that OSPF routes from the peer are not added to the kernel routing table.

* OSPF peer is configured to use OSPF Point-to-Point network (e.g., on Cisco with the "`device(config-if-X)# ip ospf network point-to-point`" command).

## Cause

Only R76SP.XX versions for 61000 / 41000 appliances are able to work with OSPF peer that is configured to use OSPF Point-to-Point network.  

**Note:**   

OSPF Point-to-Point on Ethernet configuration/functionality is available on all appliances in R81.10 and above versions.

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content