> Source: [sk114917](https://support.checkpoint.com/results/sk/sk114917)

# sk114917 - Application Control "Network Protocols" category in R80.10

| Property | Value |
|----------|-------|
| Solution ID | sk114917 |
| Date Created | 2016-12-10 |
| Last Modified | 2019-05-07 |
| Technical Level | General |
| Products | Security Gateway |
| Versions | R82.10, R82, R81.20 |

## Solution

Starting R80.10, the Application Control category "Network Protocols" will no longer match the network protocols in the table below.

The following protocols were removed from Application Control R80.10:

Enter the string to filter this table:

|----------------------------|----------|--------------------------------------------------------------|
| Application Name           | Risk     | Service Name                                                 |
| FTP Protocol               | Medium   | FTP                                                          |
| DHCP Protocol              | Very Low | bootp                                                        |
| DNS Protocol               | Very Low | domain-tcp, domain-udp                                       |
| ICAP                       | Very Low | icap                                                         |
| IKE Protocol               | Very Low | IKE, IKE_tcp                                                 |
| IMAP Protocol              | Very Low | imap                                                         |
| Jabber Protocol (XMPP)     | Low      | jabber                                                       |
| Kerberos Protocol          | Low      | Kerberos_v5_TCP                                              |
| LDAP Protocol              | Very Low | ldap,ldap-udp                                                |
| NetBIOS Datagram Service   | Very Low | nbdatagram                                                   |
| NetBIOS Name Service       | Very Low | nbname                                                       |
| NetBIOS Session Service    | Very Low | nbsession,netbios-session                                    |
| NTP Protocol               | Low      |                                                              |
| POP3 Protocol              | Very Low | pop-3                                                        |
| Radius Protocol            | Low      | radius, radius-accounting, new-radius, new-radius-accounting |
| Remote Desktop Protocol    | High     | Remote_Desktop_Protocol                                      |
| RTP Protocol               | Very Low | rtp                                                          |
| RTSP Protocol              | Very Low | rtsp                                                         |
| Server Message Block (SMB) | Very Low |                                                              |
| SIC Protocol               | Very Low | SIC-TCP                                                      |
| SIP Protocol               | Low      | sip, sip-tcp                                                 |
| SMTP Protocol              | Medium   | smtp                                                         |
| SNMP Protocol              | Low      | snmp-tcp                                                     |
| SSH Protocol               | Medium   | ssh_version_2                                                |
| SSL Protocol               | Very Low | ssl_v3                                                       |
| SSLv2                      | Very Low | ssl_v2                                                       |
| Syslog Protocol            | Very Low | syslog                                                       |
| Telnet Protocol            | High     | telnet                                                       |
| TFTP Protocol              | Medium   | tftp                                                         |
| TNS Protocol               | Low      | tns                                                          |

{#FilterTable}

In addition, these apps will no longer match on any of the following risk definitions:

* Critical Risk
* High Risk
* Medium Risk
* Low Risk
* Very Low Risk

If you wish to configure access to these protocols, do the following:

1. Add the matching service to the appropriate rule.

2. Activate the **Protocol Signature** option.

   ![](https://sc1.checkpoint.com/sc//SolutionsStatics/sk114917/sk114917-signature-enabled1706250044.png)
3. Install the policy.

**Related solutions:**

* [sk106783 - Deprecated Categories in Application Control R77.30 / R80 and above](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk106783)
* [sk110778 - What's new in R80 Application Control Database](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk110778)
* [sk112249 - Best Practices - Application Control](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk112249)
* [sk73220 - ATRG: Application Control](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk73220)

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content