> Source: [sk112598](https://support.checkpoint.com/results/sk/sk112598)

# sk112598 - Setting state of interface to "off" does not turn off the link on that interface

| Property | Value |
|----------|-------|
| Solution ID | sk112598 |
| Date Created | 2016-07-25 |
| Last Modified | 2022-08-08 |
| Technical Level | General |
| Products | Security Gateway, Security Management Server, Multi-Domain Security Management Server |
| Versions | R82.10, R82, R81.20, R82.20 |
| OS | Gaia |

## Symptoms

- In the Gaia operating system, when users set the state of an interface to "off," the link on that interface does not turn off.

1. Set the state of interface to "off":

   * Either in Gaia Portal:

     Go to *Network Management* section - click on *Network Interfaces* - select the interface - click on Edit button - clear the box Enable - click on OK
   * Or in Gaia Clish:

     *HostName\> set interface \<NAME\> state off*
2. Check the link on Gaia OS:

   *\[Expert@HostName:0\]# ethtool \<NAME\>*

   Output shows:
   *Link detected: yes*
3. Interface's LED on Gaia machine stays on (no data, not blinking).

4. On switch, the corresponding port is still "up" (operational status).

## Cause

There is a cosmetic issue with e1000e driver versions lower than [2.2.14](https://sourceforge.net/projects/e1000/files/e1000e%20stable/2.2.14/).  

To confirm that this is the cause of the problem:

1. Do one of these to set the state of the interface to "off":

   * In Gaia Portal:

     1. Go to the **Network Management** section
     2. Click **Network Interfaces**
     3. Select the interface.
     4. Click the **Edit**button.
     5. Clear the **Enable** box.
     6. Click **OK**.
   * In Gaia Clish: Enter these commands: *HostName\>set interface state off*

2. In Gaia Clish, enter these commands to check the link: *\[Expert@HostName:0\]# ethtool \<NAME\>*

   The output shows:

   ```
   Link detected: yes
   ```

   The interface's LED on the Gaia machine stays on (no data, not blinking).
   On the switch, the corresponding port is still "up" (operational status).

## Solution

This problem was fixed. The fix is included in:

* [Check Point R80.40](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk160736)

Check Point recommends to always upgrade to the most recent version   
([upgrade Security Gateway](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doShowproductpage&productTab=overview&product=435) / [upgrade Security Management Server](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doShowproductpage&productTab=overview&product=184) / [upgrade Multi-Domain Security Management](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doShowproductpage&productTab=overview&product=166)).

For **other [supported](http://www.checkpoint.com/support-services/support-life-cycle-policy/index.html) versions** , Check Point can supply a **Hotfix** . [Contact Check Point Support](https://www.checkpoint.com/support-services/contact-support/) to get a Hotfix for this issue.  
A Support Engineer will make sure the Hotfix is compatible with your environment before providing the Hotfix.  
For faster resolution and verification, please collect [CPinfo files](http://supportcontent.checkpoint.com/solutions?id=sk92739) from the Security Management Server and Security Gateways involved in the case.

**Code was improved:** Hotfix installs e1000e driver v3.3.3

**Hotfix installation instructions:**

1. Hotfix has to be installed on ***machine running Gaia OS***.

   **Note:** In cluster environment, this procedure must be performed on *all* members of the cluster.   
   **Note:** In Management HA environment, this procedure must be performed on *both* Management Servers.
2. Procedure:

   * Using CPUSE on Gaia OS:

     Refer to [sk92449: CPUSE - Gaia Software Updates (including Gaia Software Updates Agent)](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92449#How to work with CPUSE):
     * Section "[(4-A-c)](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92449#How to work with CPUSE - How to download and import a CPUSE package - Import instructions for Offline procedure - Gaia Portal)" / "[(4-A-d)](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92449#How to work with CPUSE - How to download and import a CPUSE package - Import instructions for Offline procedure - Gaia Clish)" - refer to import instructions for *Offline procedure*
     * Section "[(4-B-a)](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92449#How to work with CPUSE - How to install a CPUSE package - Installing a Hotfix package / Minor Version package)" - refer to installation instructions for *Hotfixes*

     **Note:** Appliance reboots automatically.
   * Using Legacy CLI on Gaia OS:

     1. Transfer the hotfix package to the machine (into some directory, such as */some_path_to_fix/*).

     2. Unpack and install the hotfix package:

        "`[Expert@HostName]# cd /some_path_to_fix/`  
        `[Expert@HostName]# tar -zxvf SecurePlatform_<HOTFIX_NAME>.tgz`  
        `[Expert@HostName]# ./SecurePlatform_<HOTFIX_NAME>`"
        **Note:** The script stops all Check Point services (*cpstop*) - read the output on the screen.
     3. Reboot the appliance.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
