> Source: [sk111975](https://support.checkpoint.com/results/sk/sk111975)

# sk111975 - Output of Clish command "show ospf interfaces" shows the same interface several times

| Property | Value |
|----------|-------|
| Solution ID | sk111975 |
| Date Created | 2016-07-29 |
| Last Modified | 2016-07-31 |
| Technical Level | Advanced |
| Products | Security Gateway |
| Versions | R82.10, R82, R81.20 |
| OS | Gaia |

## Symptoms

- * Output of Clish command "`show ospf interfaces`" shows the same interface several times.

  *Example - address 192.168.246.6 has been removed from the topology, but still appears in the output* :

  ```
  
  HostName> show ospf interfaces
  
  Name             IP Address         Area ID       State     NC    DR Interface     BDR Interface    Errors
  eth1-04          192.168.242.83     0.0.0.0       BDR       3     192.168.242.88   192.168.242.83   11415
  eth1-04          192.168.246.6      0.0.0.0       DR        0     192.168.246.6    0.0.0.0          0
  Mgmt             192.168.247.28     0.0.0.0       BDR       1     192.168.247.25   192.168.247.28   0
  ```

* Deleting the involved interface from OSPF configuration and re-adding the involved interface to OSPF configuration does not resolve the issue.

## Cause

This appears to be a strictly cosmetic issue.

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content