> Source: [sk109934](https://support.checkpoint.com/results/sk/sk109934)

# sk109934 - Restore from Gaia OS backup overrides the MAC addresses configuration

| Property | Value |
|----------|-------|
| Solution ID | sk109934 |
| Date Created | 2016-02-02 |
| Last Modified | 2022-03-30 |
| Technical Level | General |
| Products | Security Gateway, Security Management Server |
| Versions | R82.10, R82, R81.20, R82.20 |
| OS | Gaia |

## Symptoms

- * Restore from Gaia OS backup overrides the MAC addresses configuration on a new machine.  

* Output of "*cat /config/active \| grep -E "macaddr\|hwaddr"* " command shows:

  ```
  
  interface:eth1:hwaddr xx\:xx\:xx\:xx\:xx\:xx
  interface:eth1:original_macaddr yy\:yy\:yy\:yy\:yy\:yy
  ```

## Solution

This problem was fixed. The fix is included in:

* [Jumbo Hotfix Accumulator for R77.20](http://supportcontent.checkpoint.com/solutions?id=sk101975) - since *Take_191*
* *[Jumbo Hotfix Accumulator for R77.30](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk106162) - since Take_117*

For **other [supported](http://www.checkpoint.com/support-services/support-life-cycle-policy/index.html) versions** , [Check Point Support](http://www.checkpoint.com/support-services/contact-support/index.html) can supply a **Hotfix** .  
A Support Engineer will make sure the Hotfix is compatible with your environment before providing the Hotfix.  
For faster resolution and verification please collect [CPinfo](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92739) file from the Gaia machine involved in the case.

**Hotfix installation instructions:**

1. Hotfix has to be installed on ***machine running Gaia OS***.

   **Notes:**
   * In cluster environment, this procedure must be performed on *all* members of the cluster.
   * In Management HA environment, this procedure must be performed on *both* Management Servers.

   <br />

   <br />

2. Transfer the hotfix package to the machine (into some directory, e.g., */some_path_to_fix/* ).   

3. Unpack the hotfix package:

   ***\[Expert@HostName\]# cd /some_path_to_fix/***   
   ***\[Expert@HostName\]# tar -zxvf SecurePlatform_\<HOTFIX_NAME\>.tgz***   

4. Install the hotfix:

   ***\[Expert@HostName\]# ./SecurePlatform_\<HOTFIX_NAME\>***
   **Note:** The script will stop all of Check Point services (*cpstop* ) - read the output on the screen.   

5. Reboot the machine.

\* Please note that this fix should be installed before creating the backup.

If the backup has already been restored without installing the fix prior to the backup creation and the output of the bash command "# cat /config/active \| grep -E "macaddr\|hwaddr" shows:  
# interface:eth1:hwaddr xx\\:xx\\:xx\\:xx\\:xx\\:xx  
# interface:eth1:original_macaddr yy\\:yy\\:yy\\:yy\\:yy\\:yy

Please run the following commands as a workaround for removing the corrupted information from the database:

```
# dbset interface:eth1:hwaddr
# dbset interface:eth1:original_macaddr
# dbset :save

Note: Reboot maybe needed in order to make it work after removing the old MAC in the database.
```

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
