> Source: [sk106213](https://support.checkpoint.com/results/sk/sk106213)

# sk106213 - Disabling "Check Point ClusterXL for Bridge Active/Standby" in "cpconfig" menu also disables the Monitor Interface Link State (MILS) feature on ClusterXL member

| Property | Value |
|----------|-------|
| Solution ID | sk106213 |
| Date Created | 2015-05-26 |
| Last Modified | 2015-11-13 |
| Technical Level | Advanced |
| Products | Security Gateway |
| Versions | R82.10, R82, R81.20 |
| OS | Gaia |

## Symptoms

- * After selecting "*Disable Check Point ClusterXL for Bridge Active/Standby* " in "*cpconfig* " menu and rebooting, the Monitor Interface Link State (MILS) feature (refer to [sk31336](http://supportcontent.checkpoint.com/solutions?id=sk31336)) stopped working on ClusterXL member.

* Output of "*fw ctl get int fwha_monitor_if_link_state* " command shows that the MILS feature is disabled:  

  `fwha_monitor_if_link_state = 0`

* *$FWDIR/boot/modules/fwkern.conf* file shows that the MILS feature is disabled:  

  `fwha_monitor_if_link_state=0`

## Solution

This solution requires authentication. Please log in to view the full solution.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content