> Source: [sk102663](https://support.checkpoint.com/results/sk/sk102663)

# sk102663 - Conflicting output of auto-negotiation between CLISH and ethtool

| Property | Value |
|----------|-------|
| Solution ID | sk102663 |
| Date Created | 2014-09-23 |
| Last Modified | 2021-10-04 |
| Technical Level | General |
| Products | Security Gateway |
| Versions | R82.10, R82, R81.20 |
| OS | Gaia |

## Symptoms

- * When switching off the auto-negotiation feature for interface configured with 1G/10G, system updates the database by this value, but physical interface remains configured with auto-negotiation enabled. (Regarding IEEE standard).  

* The below outputs show the problem:   

  ```
  [Expert@FWR7540VS:0]# ethtool eth3-01
  Settings for eth3-01:
          Supported ports: [ FIBRE ]
          Supported link modes:   1000baseT/Full
                                 10000baseT/Full
          Supports auto-negotiation: Yes
          Advertised link modes:  1000baseT/Full
                                  10000baseT/Full
          Advertised auto-negotiation: Yes
          Speed: 10000Mb/s
          Duplex: Full
          Port: FIBRE
          PHYAD: 0
          Transceiver: external
          Auto-negotiation: on
          Supports Wake-on: d
          Wake-on: d
          Current message level: 0x00000007 (7)
          Link detected: yes
  
  
  [Expert@FWR7540VS:0]# ethtool -i eth3-01
               driver: ixgbe
               version: 3.1.17-NAPI
               firmware-version: 3.13-0
              bus-info: 0000:0e:00.0
  
  [Expert@FWR7540VS:0]# clish
          FWR7540VS> show interface eth3-01 auto-negotiation
  auto-negotiation off 
  ```

  <br />

* Opposite situation can be occur.   

  ```
  # ethtool eth3-01 
  Auto-negotiation: on 
  
  > show interface eth3-01 auto-negotiation
  auto-negotiation off 
  ```

  <br />

## Cause

IEEE 802.3ab and 802.3ae standards (1G/10G) defines mandatory auto-negotiation switched on.

## Solution

[Contact Check Point Support](http://www.checkpoint.com/services/contact/index.html) to get a Hotfix for this issue.   
A Support Engineer will make sure the Hotfix is compatible with your environment before providing the Hotfix.   
For faster resolution and verification please collect [CPinfo](https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk92739) files from the Security Management and Security Gateways involved in the case.

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
