> Source: [sk1000270](https://support.checkpoint.com/results/sk/sk1000270)

# sk1000270 - Check Point Maestro Orchestrator MHO-200

| Property | Value |
|----------|-------|
| Solution ID | sk1000270 |
| Date Created | 2026-10-12 |
| Last Modified | 2026-10-26 |
| Technical Level | General |
| Products | Scalable Platforms |
| Versions | R82.20 |
| OS | Gaia |
| Platform | Maestro Orchestrator |

## Solution

**Introduction \| Downloads \| Installation Instructions
Known Limitations \| Documentation \| Revision History**

Visit [Check Point CheckMates Community](https://community.checkpoint.com/) to ask questions or start a discussion and get our experts assistance.

Introduction {#Introduction}
----------------------------

Maestro Orchestrator MHO-200 is a new high-end scalable Network Security System built to secure the largest networks in the world by orchestrating multiple Check Point Security Appliances into a unified system.

The MHO-200 Maestro Orchestrator provides:

* 32 ports of 400 GbE
* Lights Out Management (LOM) card for out-of-band management
* 512Gb SSD

The MHO-200 Maestro Orchestrator 1U systems enable the use of all network speeds from 10 GbE to 400 GbE without the need to change power infrastructure facilities.

Downloads {#Downloads}
----------------------

To download these packages, you will need to have a [Software Subscription or Active Support plan](https://www.checkpoint.com/support-services/support-plans/).

If it is necessary to reinstall the software image on the Maestro Orchestrator MHO-200 appliance:

1. Restore the MHO-200 appliance to factory defaults:

   1. Connect through the console port to the MHO-200 appliance.

      See the [Getting Started Guide for Maestro Orchestrator MHO-200](https://sc1.checkpoint.com/documents/Appliances/GSG_Maestro_MHO200/EN/index.html).
   2. Reboot the appliance.

   3. Within 5 seconds, press any key to get into the Boot Menu.

   4. In the Boot Menu, select "Restore to factory defaults". Follow the instructions on the screen.

      For more information, see the [R82.20 Gaia Administration Guide](https://sc1.checkpoint.com/documents/R82.20/WebAdminGuides/EN/CP_R82.20_Gaia_AdminGuide/Default.htm).
2. On the MHO-200 appliance, install the [R82.20 Jumbo Hotfix Accumulator](https://sc1.checkpoint.com/documents/Jumbo_HFA/R82.20/index.html) (Take 10 or higher) and reboot.

Known Limitations {#Known_Limitations}
--------------------------------------

|-------------|---------------------------------------------------------------------------------------------------------------------|
| **ID**      | **Description**                                                                                                     |
| -           | It is not supported to uninstall the R82.20 Jumbo Hotfix Accumulator Take 10 from the Maestro Orchestrator MHO-200. |
| -           | Maestro Security Group Members must run R82.20 (without or with R82.20 Jumbo Hotfix Accumulator).                   |
| PMTR-133970 | Maestro Auto-Scaling is not supported.                                                                              |
| PMTR-133971 | Maestro Fastforward is not supported.                                                                               |
| PMTR-133972 | Link State Propagation (LSP) for uplink ports is not supported.                                                     |

Documentation {#Documentation}
------------------------------

|------------------------------------------------------------------------------------------------------------------------------------------------------------|
| **Check Point Maestro Orchestrator MHO-200**                                                                                                               |
| [Getting Started Guide for Maestro Orchestrator MHO-200](https://sc1.checkpoint.com/documents/Appliances/GSG_Maestro_MHO200/EN/index.html)                 |
| [Check Point Appliances Installing and Removing Transceivers and DAC Cables](https://sc1.checkpoint.com/documents/Appliances/FRU_Transceivers/Default.htm) |
| [Lights Out Management (LOM) HTML5-based Card Administration Guide](https://sc1.checkpoint.com/documents/Appliances/LOM_HTML5_Card_AdminGuide/Default.htm) |
| [R82.20 Gaia Administration Guide](https://sc1.checkpoint.com/documents/R82.20/WebAdminGuides/EN/CP_R82.20_Gaia_AdminGuide/Default.htm)                    |

{#limitationTable}

Revision History {#Revision History}
------------------------------------

Show / Hide the revision history  

|-----------------|-------------------------------|
| Date            | Description                   |
| 26 October 2026 | First release of this article |

<br />

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content