> Source: [sk1000136](https://support.checkpoint.com/results/sk/sk1000136)

# sk1000136 - HTTPS Inspection cannot download files during HTTP/2 burst transfers

| Property | Value |
|----------|-------|
| Solution ID | sk1000136 |
| Date Created | 2026-09-11 |
| Last Modified | 2026-10-13 |
| Technical Level | General |
| Products | Security Gateway |
| Versions | R82 |
| OS | Gaia |

## Symptoms

- <br />

* HTTPS Inspection cannot complete the download of a file transferred over the HTTP/2 protocol.
* The issue typically occurs with files larger than **200 KB**. Smaller files are not affected.
* The affected file can be generated by applications such as Microsoft RDLC (Local Report/ReportViewer), which create the entire file in memory before sending it to the client.
* Packet captures from either the client machine or the Security Gateway show that the client sends an ACK packet to the HTTPS server on TCP port 443 and then waits for an extended period before the server sends application data.
* The server can send the file in a burst after maintaining an idle period.
* The download fails or the connection closes before the transfer completes.

<br />

## Cause

<br />

Web Security includes HTTP/2 anti-DoS protection that monitors HTTP/2 streams with minimal flow-control credit.  

Under specific conditions, when an origin server delays its response for an extended period and then sends a large amount of data in a burst, the protection mechanism can use the server response delay when calculating the enforcement timer.  

If the timer exceeds the enforcement threshold, the Security Gateway can close the HTTP/2 connection before the download completes.

<br />

## Solution

Contact [Check Point Support](https://www.checkpoint.com/support-services/contact-support/)
to get a Hotfix for this issue.

A Support Engineer makes sure the Hotfix is compatible with your environment before providing
it.

For faster
resolution and verification, collect [CPinfo](https://support.checkpoint.com/results/sk/sk92739) file from the Security Gateway / each Cluster Member / Security Group involved in the case.

The alternative workarounds if the hotfix cannot be installed:

<br />

* Configure an HTTPS Inspection Bypass rule for the affected source client or destination web server.
* Disable HTTP/2 protocol inspection by following the guidance in [sk116022](https://support.checkpoint.com/results/sk/sk116022).

<br />

---

# Agent Instructions

This content is from the Check Point Support Center (https://support.checkpoint.com), the official knowledge base for Check Point cybersecurity products.

## Navigating This Knowledge Base

- **Complete index**: [llms.txt](https://support.checkpoint.com/llms.txt)
- **All SK articles**: [SecureKnowledge Sitemap](https://support.checkpoint.com/sitemaps/secureknowledge-sitemap-index.xml)
- **SK article URL pattern**: `https://support.checkpoint.com/results/sk/{skId}`
- **Markdown responses**: AI bot User-Agents automatically receive `text/markdown` content
